Can a person put a french polish finish over z-poxy filler? Or must one use
pumice as the grain filler?
| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| French Polish over Z-Poxy? http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=15197 |
Page 1 of 1 |
| Author: | Ricardo [ Mon Dec 31, 2007 7:14 pm ] |
| Post subject: | |
Can a person put a french polish finish over z-poxy filler? Or must one use pumice as the grain filler?
|
|
| Author: | Colin S [ Mon Dec 31, 2007 7:42 pm ] |
| Post subject: | |
French polish over Z-poxy is fine. Colin |
|
| Author: | Colin S [ Mon Dec 31, 2007 9:24 pm ] |
| Post subject: | |
Edit: I should have added, though I think we all know now, that the opposite is not true. Z-poxy does not adhere well to shellac. Colin |
|
| Author: | MaxBishop [ Tue Jan 01, 2008 12:53 am ] |
| Post subject: | |
Rich, All of my guitars are FP over Z-Poxy. It works fine and I have never had a problem. Best wishes, Max Bishop Brighton, Michigan |
|
| Author: | Ricardo [ Tue Jan 01, 2008 3:01 am ] |
| Post subject: | |
Great, thank you. Happy New Year all! |
|
| Author: | Rob W [ Tue Jan 01, 2008 4:53 am ] |
| Post subject: | |
Hey Max, do you sand back to all wood or leave a thin coat? Thanks! |
|
| Author: | Michael Dale Payne [ Wed Jan 02, 2008 2:55 am ] |
| Post subject: | |
yes FP over Zpoxy is fine Write this down and post it on your bench some where Shellac over epoxy is a go!!! Epoxy over shellac is a no-no!!!  
I know! lots of info about here and keeping track is hard Just keep this in mind. Shellac will stick to darn near any thing. but epoxy can be selective. I know a few that have success with epoxy over shellac but they tooth the shellac. As I mentioned a couple weeks ago I did some practical testing and almost in all test samples I did epoxy over shellac, it was easy to peel epoxy off of a shellac under coat, but the other way (shellac over epoxy) I had no chance of peeling the shellac off the epoxy. |
|
| Author: | MaxBishop [ Wed Jan 02, 2008 5:42 am ] |
| Post subject: | |
Rob, Depends on the wood. I will sand back to wood leaving the pores filled in the case of a wood that I don't wish to darken - like the Cocobolo guitar I am working on now. With most light woods, such as Cypress or Maple, I will leave a layer of Z-Poxy to add some amber coloring. Max |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|